1. Home
  2. Our Work
  3. Temporary Buildings
  4. Internal Temporary

Bespoke internal temporary building

Temporary building manufactured to a bespoke specification to accommodate the low roof pitch of an existing building.
2012-02-06 11:58:00 2017-03-29 10:41:27
helicopter-hanger-tphc-500-01 Bespoke internal temporary building

Bespoke Temporary Building Design

I'm asking if you can keep a little secret for me - here's why.

We've recently completed an installation on one of the more unusual requests we've handled..

And in the picture above you can see we've actually installed one of our buildings inside a hanger at a military air base.....

So what's interesting about that, you ask?

Well, I can't really go into the technicalities of why this building was requested, but the Apache helicopters in the picture above, are waiting to be manoeuvre into position inside our building, where a dehumidifying system has been installed, to preserve the helicopters.

The interesting point here is, in the picture below, you'll see the building had to be fabricated with eave and apex connectors with a a very slight 8 degree pitch, to enable us to actually fit the building inside the hanger......

Why? Because in using the standard 18-degree pitch, we wouldn't have had the height to supply the necessary width.....Due to the restriction of the roof of the hanger.

And This Is The Interesting Point.....

Since we began fabricating the buildings in house earlier in the year, it's given us the flexibility to be able to handle non-standard requirements such as this one; as well as a number of others we've worked on too.

For instance, before we began fabricating in house, we could only offer buildings to the same specification as our hire range, but that's no longer the case....

Designed To Your Exacting Specifications…

So, if you happen to have a specific area you want covering - even if it's indoors - Andy and his team are able to fabricate the building to the exact dimensions you provide us with - however precise you need to be...

And he likes a challenge too, so if there's anything you have in mind, let me know and I'll put you in touch with him to have a chat about it....

Just to re-cap though, you can have any single span width you choose up to a maximum of 30metres wide, with the tallest side height being 6.2 metres.

So if you want to save a fortune on the cost of a conventional building, and haven't got the stomach for the delays and hassles of dealing with builders........Let me know and I'll do all I can to help you.

Portable Venues (Group) Ltd

ajax loading

Building options available

Here we outline the building options available on this type of building

  • Non-insulated roof
  • 38mm insulated sandwich panel

Download our Free Buildings Guides


Please call us on

For Free Advice